Finn mobile

To clean Finn or Finn mobile, he must first be switched off and the mains cable disconnected from the socket. To clean the outside of Finn / Finn mobile, simply wipe him with a damp cloth. To clean the fan blades, the screws can be loosened and the protective grille removed. The fan blades can also be wiped with a damp cloth. After cleaning, please dry all fan parts thoroughly before Finn / Finn mobile is screwed back together and put back into operation.

There are two main differences between Finn and Finn mobile

• Finn is equipped with a fixed cable. Finn mobile has a rechargeable battery that you can charge using the detachable cable supplied. You can also use Finn mobile connected to the mains when using indoors.
• Finn mobile has IP44 certification which means you can use him indoors as well as in covered outdoor areas. Finn does not have this certification and can therefore only be used indoors.

Visually, Finn and Finn mobile differ only slightly. There is a button on the base of Finn mobile so that you can easily check the battery charge level. If you press it, the LEDs above it will show you the current battery charge level. Finn does not have these LEDs.

The status indicator for the battery is located on the top of the Finn mobile base. During normal operation with a fully charged battery, the LEDs do not light up. If the battery drops to 10 % or below, the lowest LED starts to flash. And when the battery is being charged, the LEDs light up continuously.

To check the battery status, briefly press the button with the battery indicator. The status of the battery can be recognised by the illuminated LEDs (1 LED at 20 %, 2 LEDs at 40 %, 3 LEDs at 60 %, 4 LEDs at 80 % and 5 LEDs at 100 %).

Note that the battery life depends on the settings.

With a fully charged battery, Finn mobile runs for up to 35 hours at level 1 without swing mode. At level 4 with swing mode, he runs for up to 7 hours.